Main Products

Our products are used in shower door, timber door, glass and furniture, including hinge, handle, clamp, furniture handle, patch fitting, bolt, stopper, latch, lock, bathroom accessories, roller and sliding door. Different kinds of materials are available in our products, including brass, stainless steel, aluminum and zinc alloy.

Most of our products are exported to the USA, Europe and Australia. We have various oversea customers, including small and stock listed companies. We have knowledge and experience in exporting hardware to different countries.

Why choose us

1.  Lead door control hardware manufacturer in China with 1000 employees
2.  The factory has three production base located in ZHEJIANG ,ANHUI,JIANGSU three province. The area cover 72,000 square meters.
3.  Over 33 years producing experience. Ripe production process.
4.   Impeccable testing system covered from raw material,components,semi-finished products.
5.   We has own national test laboratory to make sure the growth of our company.

Installation and installation attention of glass door hinges

1. Prepare special installation tools before installation, such as tape measure/level for measurement, woodworking pencil for line drawing, woodworking hole saw/pistol drill for hole opening, screwdriver for fixing, etc.
2. Glass door hinge installation Line drawing positioning

First use the installation measuring board or woodworking pencil to mark the positioning (the drilling margin is generally 5 mm), and then use a pistol drill or woodworking hole opener to make a 35 mm hinge cup installation hole on the door panel, and the drilling depth is generally 12 mm. .

3. Glass door hinge installation Fixed hinge cup

Insert the hinge into the hole of the hinge cup on the door panel and fix the hinge cup with self-tapping screws.

4. Glass door hinge installation and debugging

The test effect of opening and closing the cabinet door. General hinges can be adjusted in six directions, aligned up and down, and the two doors are moderately left and right. It is best to adjust the cabinet door. The gap after the door is installed and closed is generally 2 mm.

5. Attention to door hinge installation Installation location and quantity

Theoretically, the larger the distance between the two hinges, the stronger the bearing capacity. Of course, this also needs to consider the actual situation. The home door leaf is heavier and can use three hinges, and the general door can use two hinges.

6. Door hinge installation attention to prevent falling fan

Falling fan means that the door and window are poorly installed, resulting in a gradual increase in the upper gap and a gradual decrease in the lower gap, resulting in poor switching and even falling off in serious cases. Generally, the cause of this situation may be due to the selection of a hinge that is too small, or the lack of matching screws.

7. Note on door hinge installation Clearance distance

The gap between the hinge and the door panel must be well grasped, otherwise the appearance will be ugly. The gap between the door panel is normally 3-5MM, and expansion joints must be reserved.